From October 15 to 19, the highly anticipated German plastics industry exhibition, Fakuma 2024, is being held at the Friedrichshafen Exhibition Center in Germany, attracting numerous internationally renowned companies. 千赢国际官网首页入口网址是多少 is making a strong appearance at booth A1-1103, showcasing its fifth-generation technology with a variety of intelligent, efficient, and flexible solutions, becoming a focal point of attention at the event.

At the exhibition, the 千赢国际官网首页入口网址是多少 booth is bustling with visitors. Three injection molding solutions, representing the fifth generation of technology, are the stars of the show. With energy savings of 20-40% and equipped with a range of smart features, these solutions are not only attracting a large audience of professionals but also sparking in-depth discussions among industry experts. Every visitor can experience 千赢国际官网首页入口网址是多少 ’s deep expertise and forward-looking vision in the plastics industry.

Electrical Solution for the Medical Industry: Clean & Precise

At this event, 千赢国际官网首页入口网址是多少 carefully selected several flagship models for display. Among them, the Zhafir ZE1200V-430 stands out with its clean and precise characteristics, offering an ideal solution for the medical industry. The model features a 40mm screw and demonstrates the production process of eight medical syringe barrels, with an injection weight of 10.95g, using PP material and a cycle time of 12.5 seconds. Its built-in servo-hydraulic system, innovative in-mold pressure-holding technology, and advanced T-mold structure ensure both molding quality and production efficiency. This solution not only meets the medical industry’s strict requirements for cleanliness and precision but also excels in energy savings and material efficiency, earning high praise from the audience and reflecting Zhafir’s emphasis on energy conservation and environmental protection.

Electrical Solution for Consumer Goods: Flexible & Precise

Another highlight is the Zhafir ZE1500V-640, which showcases the production of wire clips, providing a flexible and precise solution for the consumer goods industry. This model features a 45mm screw, 16-cavity design, and an injection weight of 10.95g, using PA6 GF30% material, with a cycle time of 13.14 seconds.

The machine is equipped with a real-time monitor, providing a visual display of the injection molding process, enhancing process stability and efficiency in wire clip production. It easily handles complex processes and application scenarios, catering to a variety of personalized needs, demonstrating Zhafir’s deep understanding of the consumer goods industry’s demands and its relentless pursuit of product adaptability and flexibility.

Servo-hydraulic Solution for Consumer Goods: Energy-Efficient & Green

In addition, Haitian’s MA2000V/750 energy-efficient solution for the consumer goods industry provides stable process support for frisbee production. This model features a 50mm screw, an injection weight of 125.1g, and a cycle time of 44.75 seconds, using 100% recycled PP material, vividly demonstrating the concept of a circular economy in plastics. This display showcases Haitian’s technological innovations in its sustainability strategy, with its efficient, energy-saving, and eco-friendly features receiving widespread recognition and admiration from the audience.

At Fakuma 2024, visitors to 千赢国际官网首页入口网址是多少 ’s booth are not only experiencing the pulse of the plastics industry but also glimpsing a smarter, more efficient, and sustainable future. The exhibition is still in full swing, and we look forward to meeting you at booth A1-1103!

This exhibition is not just a showcase of technology but a declaration of the future. Looking ahead, 千赢国际官网首页入口网址是多少 will continue to uphold “Technology to the Point”, deepen its presence in Germany and the European market as a whole, and closely engage with local customers. Through fast-responsive services, Haitian will precisely capture and meet the personalized needs of customers in different markets, providing localized support and working together with customers to move toward a sustainable future.

From September 27 to 28, Haitian Thailand held a two-day open day in Bangkok, attracting many local clients and Chinese enterprises. This open day showcased 千赢国际官网首页入口网址是多少 ’s innovative technologies and significant achievements in its globalization strategy, fully demonstrating Haitian’s deep foundation in the Thai market.

At the start of the event, Mr. Shi Zheng, General Manager of Haitian Thailand, delivered a welcoming speech to the guests. He shared 千赢国际官网首页入口网址是多少 ’s globalization strategy and emphasized the importance of Thailand as a regional application center in enhancing local operations and customer service.

The event featured several molding solutions specifically developed for the Thai market, including Haitian injection molding machines from the MAV, MA/GⅡ, MA/F, MA/WM, JU/SE, HA/PET series, as well as Niigata injection molding machines. These machines cover a wide range of applications, from consumer products to automotive manufacturing. Haitian’s latest fifth-generation technology, praised for its intelligence, energy efficiency, and high performance, received widespread acclaim from the attendees. Other Haitian Machinery solutions, such as CNC machining centers from Haitian Precision and thixomolding machines from Haitian Die Casting, were also showcased during the open day.

Through live demonstrations, technical explanations, and interactive sessions, customers were able to gain a more direct understanding of the performance features of the products. This not only enhanced their recognition of Haitian but also strengthened customer loyalty.

As a global leader in machinery manufacturing, 千赢国际官网首页入口网址是多少 has been deeply engaged in the Thai market for over 20 years. In 2016, it established a wholly owned subsidiary in Thailand, continuously driving the upgrade and development of the local manufacturing industry. With the continuous growth of the global economy and increasingly close trade relations, Southeast Asia, with its unique geographical advantages, abundant labor resources, and cost-effectiveness, is gradually becoming an important hub for global manufacturing. Thailand, as a key economy in Southeast Asia, offers an ideal environment for Haitian’s investment and factory establishment.

The successful hosting of this open day not only showcased 千赢国际官网首页入口网址是多少 ’s strong presence and brand influence in the Thai market but also deepened exchanges and cooperation between Haitian and local clients. Furthermore, it provided solid support for the development of Chinese enterprises in Thailand and the broader Southeast Asian region. In the future, Haitian will continue to deepen its globalization strategy by leveraging technological innovation and localized operations to provide better products and services to customers worldwide.

千赢国际官网首页入口网址是多少 ’s 3rd Generation Technology is much more than just another machine update. It consistently fits into the success strategy of “Technology to the Point” and includes many beneficial innovations on several levels:

New Developments

• New generation of servo drive systems – tailormade, high-performance
• Electric injection units in a new dimension
• Economical machine concepts

New Modularity

• Modular combination of mature core technologies
• Hybrid solutions for increased flexibility

Open Integration

• New intelligence through Connectivity Plus
• Highest performance with Motion Plus

The move into the 3rd Generation Technology opens up numerous new possibilities and intelligent solutions for us in order to meet the increasing economic and ecological requirements even better. Our aim is to keep the ongoing development of hardware and software in a customer oriented balance. Every development idea is put to the test in terms of efficiency and flexibility. Only what guarantees these two benefits will be realized.

One example of our Haitian Family: Our bestseller Haitian Mars Series in 3rd generation from 600 – 33,000 kN

Technology Generation 3:
Much more than a machine upgrade

Productivity and flexibility are the pillars of success in manufacturing. Modern injection molding machines from Haitian and Zhafir serve both sides and keep them in perfect balance. Our machine technologies to the point increase production efficiency while conserving resources, increase application diversity and always pursue the same goal: the best possible utilisation of production capacities at a high level.

Just a few years ago, our research and development work was primarily focused on optimizing design, mechanics and control. The latter was largely in the hands of our system partners. With increasing digitalization and the nationwide expansion of stable Internet lines and infrastructures, the machines became more intelligent and communicative, opening up to the future requirements and scenarios of information technology at the “Industry 4.0” level.

While digital interfaces were initially still part of the optional machine equipment, today all internationally demanded interfaces in our company are part of the basic equipment, the technological standard. Both the electric Zhafir Series and the servo-hydraulic Haitian Series are fit for the future, ready for new challenges. “With the 3rd technology generation, the customer no longer buys pure hardware. Instead, the customer buys a system, a platform with intelligent and extremely fast adaptive software. This is one of our core developments,” says Mr. Fu, Chief Engineer of 千赢国际官网首页入口网址是多少 in Ningbo, China.

Our in-house developed software solutions offer the processor a very high flexibility in the process optimization of all axes. Together with OPC-UA, they enable an extremely open integration or connectivity with all common Euromap interfaces, and the smooth connection of automation or any MES systems. Mr Fu: “We supply the customer with an intelligent machine system that is open to all possibilities, leaving him free to choose his integration partners.” In this way, the highly standardized Haitian and Zhafir machines can be integrated into automated processes, cells and production lines as required – maximum flexibility with the best possible productivity.
As digitalization becomes more intelligent and complex, the machine becomes more and more a functional body – powerful, flexible and as susceptible to failure as possible, explains Mr. Fu. He continues: “However, this in no way diminishes the importance of the machine. In general, although the technical optimization of the injection molding machine is already quite exhausted, we still see potential for groundbreaking improvements. Not so much in mechanics as in frugal innovation.” Reductions in material and energy consumption, minimized transport and delivery costs, less susceptibility to faults, simplified maintenance and shortened maintenance times would just be some of the monetary consequences of concentrating on the essentials. With this in mind, around 400 engineers and process experts are constantly working on the optimization and further development of our servo-hydraulic and electric injection molding machines. We see the further standardization of machine components and assemblies as an equally important task. This is the only way for us as machine builders to think in terms of large quantities, create cost-efficient production processes and pass on the cost advantage to our customers.

As a pioneer of high-quality standard machine construction, it was our aim from day one to deliver technology to the point. The worldwide response to our 1st machine generation has impressively confirmed this decision. The innovative servo-hydraulic drive technology of the Haitian Mars Series has been inspiring for more than 10 years with its outstanding economy and reliability.

Motion Plus

With Motion Plus on board, mechanics and software form a strong symbiosis. High-performance drives and intelligent algorithms optimize the movements of all axes – quickly, accurately and very efficiently.

The all-electric Zhafir Venus Series is a prime example of efficient injection molding technology in terms of precision, dynamics and environment– competitive advantages with sustainability.

This demanding approach continues to drive us today. Mr. Fu says: “Our engineers are constantly working on optimizing our hardware components. The focus here is on dynamics, precise movements and process accuracy, but also on standardization with maximum flexibility. Our goal is to maintain a healthy balance between hardware and software. In our opinion, intelligent motion control can only develop into a real customer advantage and offer the injection molding machine new possibilities with well thought-out and above all cost-efficient hardware.”

Mr. Fu sees the further development of the drives as a typical example of this. “The new generation of electric and servo hydraulic drives in connection with the new inverter generation promise more power with less energy consumption and provide for more precise movements of all axes.” The specially developed servo motors are tailor-made for the most diverse application tasks, such as injection with long holding pressure, dynamic injection with medium holding pressure or extremely fast injection without holding pressure. The drives have been developed for each of these tasks. “Efficient and smart manufacturing processes and large-volume production make customized components a cost-efficient standard,” says Mr. Fu, smiling. “Paradoxically, one could also call it tailor-made standardization. This opens up completely new perspectives for the entire company.“ Tailor-made drives, intelligent software and the unique manufacturing power in the Group allow us, for example, to think even larger in terms of electric drives and to further expand the still attractively priced range of future-oriented electric concepts – keywords being large clamping forces and above all large, affordable injection units.

Another example is our servo-hydraulic Haitian Series. Thanks to intelligent algorithms, the injection process has been optimized by replacing proportional valves with standard valves – closed-loop control, without sacrificing speed and pressure. Mr. Fu commented, “The sophisticated design of the injection unit in combination with a powerful servo drive system benefits from independent algorithm modules. Thanks to their fast, accurate calculations and highly efficient mathematical models, the stability of the injection process is now much higher, whether for extremely fast or slow injection. The improvement is significant.”

Big Dimensions

A very innovative example is provided by the new, big electric injection units. “Here you can see the perfect interaction of software and hardware,” says Mr. Fu. “The challenge was the exact synchronization of all four spindles and with high dynamic in acceleration. This is only possible with extremely powerful, reliable, but also flexible components that are controlled by an intelligent control center.”

Motion Plus is the bundling of already established and new developments around intelligent motion control. Although many of these components are already standard in the Zhafir Series, for the Haitian Series it was a big step towards the digital future, digital intelligence. “This may not sound spectacular across all competitors, but given the enormous power of performance and service capacity, this technological leap is taking on a new meaning,” says Mr. Fu.

The consistent standardization of mature core technologies opens up new possibilities for 千赢国际官网首页入口网址是多少 to combine within the various systems. “We call this the “new” modularity and in many respects we mean the abandonment of familiar structures. Apart from that, the R&D teams had to think modularly from the start, but for entire assemblies. This way of thinking allows us today to think of any combinations. Each clamping unit and each injection unit can be combined with any component – whether electric or hydraulic drive system, toggle system or two-platen solution, single or multi-color injection. The new Zhafir Jenius Series is the first result: electric injection unit and a two-platen clamping unit. The JE Series combines mature and proven core technologies from the electric and hydraulic world. Further hybrids will follow.